Walmart CBLs Fire Safety

This deck covers essential fire safety procedures and guidelines as outlined in Walmart's CBLs, including fire extinguisher use, merchandise stacking, and emergency protocols.

Pull the pin from the fire extinguisher.

Step 1
Tap or swipe ↕ to flip
Swipe ←→Navigate
1/18

Key Terms

Term
Definition
Pull the pin from the fire extinguisher.
Step 1
Aim the fire extinguisher at the base of the fire.
Step 2
Squeeze the handle of the fire extinguisher.
Step 3
Sweep the fire extinguisher back and forth.
Step 4
Merchandise should not be stacked higher than 10 feet on backroom steels.
False
Fire exits need to have at least 24 inches of clearance on either side.
False

Related Flashcard Decks

Study Tips

  • Press F to enter focus mode for distraction-free studying
  • Review cards regularly to improve retention
  • Try to recall the answer before flipping the card
  • Share this deck with friends to study together
TermDefinition
Pull the pin from the fire extinguisher.
Step 1
Aim the fire extinguisher at the base of the fire.
Step 2
Squeeze the handle of the fire extinguisher.
Step 3
Sweep the fire extinguisher back and forth.
Step 4
Merchandise should not be stacked higher than 10 feet on backroom steels.
False
Fire exits need to have at least 24 inches of clearance on either side.
False
Merchandise must remain at least 18 inches from sprinklers in order for them to work properly.
True
In the unlikely event of a fire, where should people gather?
People should be guided to the nearest fire exit and go to the meeting point on the evacuation plan.
If a fire has broken out, and it involves pool chemicals, which type of fire extinguisher should be used?
Never attempt to fight a fire involving pool chemicals with a fire extinguisher.
Only certified electricians are allowed to work on your facility's electrical system.
True
Circuit breaker boxes require at least 36 inches of clearance in front of them.
True
The Maximum number of extension cords you can connect to one another is three.
False
Orange outlets are only to be used for heavy equipment such as the compactor.
False
If the ANSUL system does not put out a fire in a food preparation area, which fire extinguisher should be used?
Class K Fire Extinguisher
What is the minimum acceptable distance from the facility for an emergency evacuation meeting point?
50 feet
In order to comply with fire safety, what should the maximum height of the merchandise on a rolling rack be?
12 feet
How long can an extension cord be used within your facility?
90 days of service

order

1. shut down the powered equipment using normal procedures
2. unplug the equipment if possible
3. complete the required information and place the do not operate tag on the equipment
4. notify management of the issue