QQuestionArt
QuestionArt
When using power tools, never engage the
a. locking spring
b. booster
c. bit shank
d. trigger lock
Before replacing parts such as bits, blades, or discs on any tool, you must
a. polish it with fine steel wool
b. recharge the tool's battery
c. disconnect the power source
d. inspect them for cracks
Most hammer drills will not hammer until pressure is
a. released from the powder charge
b. reached in the hydraulic cylinder
c. detected at the trigger lock
d. applied to the drill bit
A pneumatic drill is commonly used
a. in areas where noise is a problem
b. to supply compressed air to de-burr pipes
c. when there is no source of electricity
d. for intricate detail work
Never use a circular saw that does not have an upper blade guard because the
a. trigger lock will not work properly
b. saw will not cut cleanly
c. guard protects you from touching the blade
d. saw kerf will be too wide
When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's
a. arbor
b. kerf
c. distortion
d. stroke
Saws with fine blades that are excellent for delicate and intricate cutting are called
a. band saws
b. saber saws
c. abrasive saws
d. worm-drive saws
over 1 year agoReport content
Answer
Full Solution Locked
Sign in to view the complete step-by-step solution and unlock all study resources.
Step 1:I'll solve this problem systematically by addressing each multiple-choice question:
Step 2:
When using power tools, never engage the:
Final Answer
Explanation: The trigger lock is a safety mechanism designed to prevent accidental tool activation. Engaging it would actually prevent tool operation, so you should never engage it during normal tool use. 2. Before replacing parts such as bits, blades, or discs on any tool, you must: Explanation: Safety protocol requires disconnecting electrical or battery power before changing any tool components to prevent accidental startup and potential injury. 3. Most hammer drills will not hammer until pressure is: Explanation: Hammer drills require direct pressure against the surface to activate the hammering mechanism, ensuring the tool only operates when intentionally pressed against a work surface. 4. A pneumatic drill is commonly used: Explanation: Pneumatic tools operate using compressed air, making them ideal in locations without electrical power or where electrical tools might be unsafe. 5. Never use a circular saw that does not have an upper blade guard because the: Explanation: The blade guard is a critical safety feature that prevents direct contact with the spinning saw blade, protecting the user from potential serious injury. 6. When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's: Explanation: The kerf is the width of material removed by the saw blade. Cutting on the waste side ensures precise measurements by accounting for the blade's cutting width. 7. Saws with fine blades that are excellent for delicate and intricate cutting are called: Explanation: Saber saws (also known as jigsaws) have thin, reciprocating blades perfect for making detailed, curved, or intricate cuts in various materials. 1. d. trigger lock 2. c. disconnect the power source 3. d. applied to the drill bit 4. c. when there is no source of electricity 5. c. guard protects you from touching the blade 6. b. kerf 7. b. saber saws
Need Help with Homework?
Stuck on a difficult problem? We've got you covered:
- Post your question or upload an image
- Get instant step-by-step solutions
- Learn from our AI and community of students