Skip to content
Exam Guides

Test Bank for Financial Statement Analysis and Security Valuation, 5th Edition

  • Finance
  • 904 pages
  • Shared February 2025
  • 81 downloads

Test Bank for Financial Statement Analysis and Security Valuation, 5th Edition provides in-depth questions and solutions to reinforce key concepts. Start practicing today!

Preview 31 of 904 pages

See the first 31 pages exactly as they appear in the document.

  1. Page 1
    Read page 1 as text

    1 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY Questions 1. A random error has equal probability of being too high or too low. This type of error occurs when estimating the value of the last digit of a measurement. A systematic error is one that always occurs in the same direction, either too high or too low. For example, this type of error would occur if the balance you were using weighed all objects 0.20 g too high, that is, if the balance wasn’t calibrated correctly. A r andom error is an indeterminate error, whereas a systematic error is a determinate error. 2. Precision: reproducibility; accuracy: the agreement of a measurement with the true value. a. Imprecise and inaccurate data: 12.32 cm, 9.63 cm, 11.98 cm, 13.34 cm b. Precise but inaccurate data: 8.76 cm, 8.79 cm, 8.72 cm, 8.75 cm c. Precise and accurate data: 10.60 cm, 10.65 cm, 10.63 cm, 10.64 cm Data can be imprecise if the measuring device is imprecise as well as if the user of the measuring device has poor skills. Data can be inaccurate due to a systematic error in the measuring device or with the user. For example, a balance may read all masses as weighing 0.2500 g too high or the user of a graduated cylinder may read all measurements 0.05 mL too low. A set of measurements that are imprecise implies that all the numbers are not close to each other. If the numbers aren’t reproducible, then all the numbers can’t be very close to the true value. Some say that if the average of imprecise data gives the true value, then the data are accurate; a better description is that the data takers are extremely lucky. 3. Accuracy refers to how close a measurement or series of measurements are to an accepted or true value. Precision refers to how close a series of measurements of the same item are to each other (reproducible). The results, average = 14.91 ±0.03%, are precise (are close to each other) but are not accurate (are not close to the true value). 4. Volume readings are estimated to one place past the markings on the glassware. The assumed uncertainty is ±1 in the estimated digit. For glassware a, the volume would be estimated to the tenths place since the markings are to the ones place. A sample reading would be 4.2 with an uncertainty of ±0.1. This reading has two significant figures. For glassware b, 10.52 ±0.01 would be a sample reading and the uncertainty; this reading has four significant figures. For glassware c, 18 ±1 would be a sample reading and the uncertainty, with the reading having two significant figures. 5. Significant figures are the digits we associate with a number. They contain all of the certain digits and the first uncertain digit (the first estimated digit). What follows is one thousand

  2. Page 2
  3. Page 3
    Read page 3 as text

    2 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY indicated to varying numbers of significant figures: 1000 or 1 × 10 3 (1 S.F.); 1.0 × 10 3 (2 S.F.); 1.00 × 10 3 (3 S.F.); 1000. or 1.000 × 10 3 (4 S.F.). To perform the calculation, the addition/subtraction significant figure rule is applied to 1.5  1.0. The result of this is the one-significant-figure answer of 0.5. Next, the multi- plication/division rule is applied to 0.5/0.50. A one-significant-figure number divided by a two-significant-figure number yields an answer with one significant figure (answer = 1). 6. In both sets of rules, the least precise number determines the number of significant figures in the final result. For multiplication/division, the number of significant figures in the result is the same as the number of significant figures in the least precise number used in the calculation. For addition/subtraction, the result has the same number of decimal places as the least precise number used in the calculation (not necessarily the number with the fewest significant figures). 7 . In a subtraction, the result gets smaller , but the uncertainties add. If the two numbers are very close together, the uncertainty may be larger than the result. For example, let’s assume we want to take the difference of the following two measured quantities, 999,999 ±2 and 999,996 ±2. The dif ference is 3 ±4. Because of the uncertainty, subtracting two similar numbers is poor practice. 8. Consider gold with a density of 19.32 g/cm 3 . The two possible conversion factors are: 3 cm 1 g 32 . 19 or g 32 . 19 cm 1 3 Use the first form when converting from the volume of gold in cm 3 to the mass of gold, and use the second form when converting from mass of gold in grams to the volume of gold. When using conversion factors, concentrate on the units crossing off. 9. Straight line equation: y = mx + b, where m is the slope of the line and b is the y -intercept. For the T F vs. T C plot: T F = (9/5)T C + 32 y = m x + b The slope of the plot is 1.8 (= 9/5) and the y -intercept is 32  F. For the T C vs. T K plot: T C = T K  273 Y = m x + b The slope of the plot is 1, and the y -intercept is  273  C. 10. To convert from Celsius to Kelvin, a constant number of 273 is added to the Celsius temperature. Because of this,  T(  C) =  T(K). When converting from Fahrenheit to Celsius, one conversion that must occur is to multiply the Fahrenheit temperature by a factor less than one (5/9). Therefore, the Fahrenheit scale is more expansive than the Celsius scale, and 1  F would correspond to a smaller temperature change than 1  C or 1 K.

  4. Page 4
    Read page 4 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 3 11. a. coffee; saltwater; the air we breathe (N 2 + O 2 + others); brass (Cu + Zn) b. book; human being; tree; desk c. sodium chloride (NaCl); water (H 2 O); glucose (C 6 H 12 O 6 ); carbon dioxide (CO 2 ) d. nitrogen (N 2 ); oxygen (O 2 ); copper (Cu); zinc (Zn) e. boiling water; freezing water; melting a popsicle; dry ice subliming f. Electrolysis of molten sodium chloride to produce sodium and chlorine gas; the explosive reaction between oxygen and hydrogen to produce water; photosynthesis, which converts H 2 O and CO 2 into C 6 H 12 O 6 and O 2 ; the combustion of gasoline in our car to produce CO 2 and H 2 O 12. a. b. 13. The law of conservation of energy states that energy can be converted from one form to another but can neither be destroyed nor created; the energy content of the universe is constant. The two categories of energy are kinetic energy and potential energy. Kinetic energy is energy due to motion and potential energy is stored energy due to position. For example, the energy stored in the bonds between atoms in a molecule is potential energy. 14. Counting by weighing utilizes the average mass of a particular unit of substance. Consider a large sample size of marbles which will contain many different individual masses for the various marbles. However, the very large sample size will have an average mass so that the gas element (monoatomic) atoms/molecules far apart; random order; takes volume of container atoms/molecules close together; somewhat ordered arrangement; takes volume of container liquid element solid element atoms/molecules close together; ordered arrangement; has its own volume 2 compounds compound and element (diatomic)

  5. Page 5
    Read page 5 as text

    4 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY marbles behave as if each individual marble has that average mass. This assumption is valid as long as the sample size is very large. When a large sample of marbles is weighed, one divides the total mass of marbles by the average mass of a marble, and this will give a very good estimate of the number of marbles present. Because we can’t count individual atoms, we “count” the atoms by weighing; converting the sample mass in grams to the number of atoms in the sample by using the average mass of the substance. The mole scale of atoms is a huge number (6.022 × 10 23 atoms = 1 mole), so the assumption that a weighable sample size behaves as a bunch of atoms, each with the same average mass, is valid and allows one to count atoms by weighing. The mole scale also gives easier numbers to deal with. So instead of saying you have 12 × 10 23 atoms of helium, you can instead say that you have 2.0 moles of helium. Exercises Significant Figures and Unit Conversions 15. a. exact b. inexact c. exact d. inexact (π has an infinite number of decimal places.) 16. a. one significant figure (S.F.). The implied uncertainty is ±1000 pages. More significant figures should be added if a more precise number is known. b. two S.F. c. four S.F. d. two S.F. e. infinite number of S.F. (exact number) f. one S.F. 17. a. 6.07 × 15 10  ; 3 S.F. b. 0.003840; 4 S.F. c. 17.00; 4 S.F. d. 8 × 10 8 ; 1 S.F. e. 463.8052; 7 S.F. f. 300; 1 S.F. g. 301; 3 S.F. h. 300.; 3 S.F. 18. a. 100; 1 S.F. b. 1.0 × 10 2 ; 2 S.F. c. 1.00 × 10 3 ; 3 S.F. d. 100.; 3 S.F. e. 0.0048; 2 S.F. f. 0.00480; 3 S.F. g. 4.80 × 3 10  ; 3 S.F. h. 4.800 × 3 10  ; 4 S.F. 19. When rounding, the last significant figure stays the same if the number after this significant figure is less than 5 and increases by one if the number is greater than or equal to 5. a. 3.42 × 4 10  b. 1.034 × 10 4 c. 1.7992 × 10 1 d. 3.37 × 10 5 20. a. 4 × 10 5 b. 3.9 × 10 5 c. 3.86 × 10 5 d. 3.8550 × 10 5 21. Volume measurements are estimated to one place past the markings on the glassware. The first graduated cylinder is labeled to 0.2 mL volume increments, so we estimate volumes to the hundredths place. Realistically, the uncertainty in this graduated cylinder is ± 0.05 mL. The second cylinder, with 0.02 mL volume increments, will have an uncertainty of ± 0.005

  6. Page 6
    Read page 6 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 5 mL. The approximate volume in the first graduated cylinder is 2.85 mL, and the volume in the other graduated cylinder is approximately 0.280 mL. The total volume would be: 2.85 mL +0.280 mL 3.13 mL We should report the total volume to the hundredths place because the volume from the first graduated cylinder is only read to the hundredths (read to two decimal places). The first graduated cylinder is the least precise volume measurement because the uncertainty of this instrument is in the hundredths place, while the uncertainty of the second graduated cylinder is to the thousandths place. It is always the least precise measurement that limits the precision of a calculation. 22. a. Volumes are always estimated to one position past the marked volume increments. The estimated volume of the first beaker is 32.7 mL, the estimated volume of the middle beaker is 33 mL, and the estimated volume in the last beaker is 32.73 mL. b. Yes, all volumes could be identical to each other because the more precise volume readings can be rounded to the other volume readings. But because the volumes are in three different measuring devices, each with its own unique uncertainty, we cannot say with certainty that all three beakers contain the same amount of water. c. 32.7 mL 33 mL 32.73 mL 98.43 mL = 98 mL The volume in the middle beaker can only be estimated to the ones place, which dictates that the sum of the volume should be reported to the ones place. As is always the case, the least precise measurement determines the precision of a calculation. 23. For addition and/or subtraction, the result has the same number of decimal places as the number in the calculation with the fewest decimal places. When the result is rounded to the correct number of significant figures, the last significant figure stays the same if the number after this significant figure is less than 5 and increases by one if the number is greater than or equal to 5. The underline shows the last significant figure in the intermediate answers. a. 212.2 + 26.7 + 402.09 = 640.99 = 641.0 b. 1.0028 + 0.221 + 0.10337 = 1.32717 = 1.327 c. 52.331 + 26.01  0.9981 = 77.3429 = 77.34 d. 2.01 × 10 2 + 3.014 × 10 3 = 2.01 × 10 2 + 30.14 × 10 2 = 32.15 × 10 2 = 3215 When the exponents are different, it is easiest to apply the addition/subtraction rule when all numbers are based on the same power of 10. e. 7.255  6.8350 = 0.42 = 0.420 (first uncertain digit is in the third decimal place). 24. For multiplication and/or division, the result has the same number of significant figures as the number in the calculation with the fewest significant figures.

  7. Page 7
    Read page 7 as text

    6 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY a. 2.26 35 2.26 1.01 273 0.0821 0.102     b. 0.14 × 6.022 × 10 23 = 8.431 × 10 22 = 8.4 × 10 22 ; since 0.14 only has two significant figures, the result should only have two significant figures. c. 4.0 × 10 4 × 5.021 × 3 10  × 7.34993 × 10 2 = 1.476 × 10 5 = 1.5 × 10 5 d. 12 12 7 6 10 67 . 6 10 67 66 . 6 10 00 . 3 10 00 . 2        25. a. Here, apply the multiplication/division rule first; then apply the addition/subtraction rule to arrive at the one-decimal-place answer. We will generally round off at intermediate steps in order to show the correct number of significant figures. However, you should round off at the end of all the mathematical operations in order to avoid round-off error. The best way to do calculations is to keep track of the correct number of significant figures during intermediate steps, but round off at the end. For this problem, we underlined the last significant figure in the intermediate steps. 4326 . 0 705 . 80 623 . 0 470 . 0 1 . 3 526 . 2   = 0.8148 + 0.7544 + 186.558 = 188.1 b. Here, the mathematical operation requires that we apply the addition/subtraction rule first, then apply the multiplication/division rule. 6 . 1 91 . 2 404 . 6 1 . 17 7 . 18 91 . 2 404 . 6     = 12 c. 6.071 × 5 10   8.2 × 6 10   0.521 × 4 10  = 60.71 × 6 10   8.2 × 6 10   52.1 × 6 10  = 0.41 × 6 10  = 4 × 7 10  d. 26 12 13 12 12 13 13 13 12 13 12 10 3 . 6 10 7 6 10 2 4 10 63 10 4 10 0 . 4 10 38 10 3 . 6 10 4 10 0 . 4 10 8 . 3                         e. 4 75 5 . 19 4 175 . 3 8 . 2 1 . 4 5 . 9     = 4.89 = 4.9 Uncertainty appears in the first decimal place. The average of several numbers can only be as precise as the least precise number. Averages can be exceptions to the significant figure rules. f. 925 . 8 0 02 . 0 100 925 . 8 905 . 8 925 . 8    × 100 = 0.22 26. a. 6.022 × 10 23 × 1.05 × 10 2 = 6.32 × 10 25 b. 17 9 8 34 10 82 . 7 10 54 . 2 10 998 . 2 10 6262 . 6         

  8. Page 8
    Read page 8 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 7 c. 1.285 × 2 10  + 1.24 × 3 10  + 1.879 × 1 10  = 0.1285 × 1 10  + 0.0124 × 1 10  + 1.879 × 1 10  = 2.020 × 1 10  When the exponents are different, it is easiest to apply the addition/subtraction rule when all numbers are based on the same power of 10. d. 27 23 23 10 29 . 2 10 02205 . 6 00138 . 0 10 02205 . 6 ) 00728 . 1 00866 . 1 (        e. 1 2 2 2 2 2 10 1 . 8 100 10 875 . 9 10 080 . 0 100 10 875 . 9 10 795 . 9 10 875 . 9             f. 3 10 625 . 1 10 824 . 0 10 942 . 0 3 10 625 . 1 10 234 . 8 10 42 . 9 3 3 3 3 2 2            = 1.130 × 10 3 27. a. 8.43 cm × mm 3 . 84 m mm 1000 cm 100 m 1   b. 2.41 × 10 2 cm × cm 100 m 1 = 2.41 m c. 294.5 nm cm 10 945 . 2 m cm 100 nm 10 1 m 1 5 9       d. 1.445 × 10 4 m × m km 1000 1 = 14.45 km e. 235.3 m × m mm 1000 = 2.353 × 10 5 mm f. 903.3 nm m μ 9033 . 0 m m μ 10 1 nm 10 1 m 1 6 9      28. a. 1 Tg kg 10 1 g 1000 kg 1 Tg g 10 1 9 12      b. 6.50 × 10 2 Tm nm 10 50 . 6 m nm 10 1 Tm m 10 1 23 9 12       c. 25 fg kg 10 2.5 kg 10 25 g 1000 kg 1 fg 10 1 g 1 17 18 15          d. 8.0 dm 3 × 3 1 dm L = 8.0 L (1 L = 1 dm 3 = 1000 cm 3 = 1000 mL) e. 1 mL L μ 10 1 L L μ 10 1 mL 000 1 L 1 3 6      f. 1 μg pg 10 1 g pg 10 1 g μ 10 1 g 1 6 12 6      

  9. Page 9
    Read page 9 as text

    8 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 29. a. Appropriate conversion factors are found in Appendix 6. In general, the number of significant figures we use in the conversion factors will be one more than the number of significant figures from the numbers given in the problem. This is usually sufficient to avoid round-off error. 3.91 kg × kg 4536 . 0 lb 1 = 8.62 lb; 0.62 lb × lb oz 16 = 9.9 oz Baby’s weight = 8 lb and 9.9 oz or , to the nearest ounce, 8 lb and 10. oz. 51.4 cm × cm 54 . 2 in 1 = 20.2 in ≈ 20 1/4 in = baby’s height b. 25,000 mi × mi km 61 . 1 = 4.0 × 10 4 km; 4.0 × 10 4 km × km m 1000 = 4.0 × 10 7 m c. V = 1 × w × h = 1.0 m ×                    dm 10 m 1 dm 1 . 2 cm 100 m 1 cm 6 . 5 = 1.2 × 2 10  m 3 1.2 × 2 10  m 3 × 3 3 dm L 1 m dm 0 1        = 12 L 12 L × 3 3 cm 54 . 2 in 1 L cm 1000          = 730 in 3 ; 730 in 3 × 3 in 12 ft 1         = 0.42 ft 3 30. a. 908 oz × lb kg 4536 . 0 oz 16 lb 1  = 25.7 kg b. 12.8 L × qt 4 gal 1 L 9463 . 0 qt 1  = 3.38 gal c. 125 mL × L 9463 . 0 qt 1 mL 1000 L 1  = 0.132 qt d. 2.89 gal × L 1 mL 1000 qt 057 . 1 L 1 gal 1 qt 4   = 1.09 × 10 4 mL e. 4.48 lb × lb 1 g 6 . 453 = 2.03 × 10 3 g f. 550 mL × L qt 06 . 1 mL 1000 L 1  = 0.58 qt 31. a. 1.25 mi × mi furlongs 8 = 10.0 furlongs; 10.0 furlongs × furlong rods 40 = 4.00 × 10 2 rods 4.00 × 10 2 rods × cm 100 m 1 in cm 54 . 2 yd in 36 rod yd 5 . 5    = 2.01 × 10 3 m

  10. Page 10
    Read page 10 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 9 2.01 × 10 3 m × m 1000 km 1 = 2.01 km b. Let's assume we know this distance to ±1 yard. First, convert 26 miles to yards. 26 mi × ft 3 yd 1 mi ft 5280  = 45,760. yd 26 mi + 385 yd = 45,760. yd + 385 yd = 46,145 yards 46,145 yard × yd 5 . 5 rod 1 = 8390.0 rods; 8390.0 rods × rods 40 furlong 1 = 209.75 furlongs 46,145 yard × cm 100 m 1 in cm 54 . 2 yd in 36   = 42,195 m; 42,195 m × m 1000 km 1 = 42.195 km 32. a. 1 ha × 2 2 m 1000 km 1 ha m 000 , 10          = 1 2 2 km 10   b. 5.5 acre × 2 2 cm 100 m 1 in cm 54 . 2 yd in 36 rod yd 5 . 5 acre rod 160             = 2.2 × 10 4 m 2 2.2 × 10 4 m 2 × 2 4 m 10 1 ha 1  = 2.2 ha; 2.2 × 10 4 m 2 × 2 m 1000 km 1         = 0.022 km 2 c. Area of lot = 120 ft × 75 ft = 9.0 × 10 3 ft 2 9.0 × 10 3 ft 2 × 2 2 rod 160 acre 1 yd 5 . 5 rod 1 ft 3 yd 1           = 0.21 acre; acre 000 , 31 $ acre 21 . 0 500 , 6 $  We can use our result from (b) to get the conversion factor between acres and hectares (5.5 acre = 2.2 ha.). Thus 1 ha = 2.5 acre. 0.21 acre × acre 5 . 2 ha 1 = 0.084 ha; the price is: ha 000 , 77 $ ha 084 . 0 500 , 6 $  33. a. 1 troy lb × g 1000 kg 1 grain g 0648 . 0 pw grains 24 oz troy pw 20 lb troy oz troy 12     = 0.373 kg 1 troy lb = 0.373 kg × kg lb 205 . 2 = 0.822 lb b. 1 troy oz × grain g 0648 . 0 pw grains 24 oz troy pw 20   = 31.1 g 1 troy oz = 31.1 g × g 200 . 0 carat 1 = 156 carats

  11. Page 11
    Read page 11 as text

    10 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY c. 1 troy lb = 0.373 kg; 0.373 kg × g 3 . 19 cm 1 kg g 1000 3  = 19.3 cm 3 34. a. 1 grain ap × ap dram g 888 . 3 scruples 3 ap dram 1 ap grain 20 scruple 1   = 0.06480 g From the previous question, we are given that 1 grain troy = 0.0648 g = 1 grain ap. So the two are the same. b. 1 oz ap × g 1 . 31 * troy oz 1 ap dram g 888 . 3 ap oz ap dram 8   = 1.00 oz troy; *see Exercise 33b. c. 5.00 × 10 2 mg × ap dram scruples 3 g 888 . 3 ap dram 1 mg 1000 g 1   = 0.386 scruple 0.386 scruple × scruple ap grains 20 = 7.72 grains ap d. 1 scruple × ap dram g 888 . 3 scruples 3 ap dram 1  = 1.296 g 35. 15.6 g × g 65 . 0 capsule 1 = 24 capsules 36. 1.5 teaspoons × teaspoon 50 . 0 acet mg . 80 = 240 mg acetaminophen kg 454 . 0 lb 1 lb 24 acet mg 240  = 22 mg acetaminophen/kg kg 454 . 0 lb 1 lb 35 acet mg 240  = 15 mg acetaminophen/kg The range is from 15 to 22 mg acetaminophen per kg of body weight. 37. warp 1.71 = h / yd 2000 knot 1 h min 60 min s 60 m yd 094 . 1 s m 10 00 . 3 00 . 5 8               = 2.95 × 10 9 knots h min 60 min s 60 km 609 . 1 mi 1 m 1000 km 1 s m 10 00 . 3 00 . 5 8               = 3.36 × 10 9 mi/h 38. s 58 . 9 m . 100 = 10.4 m/s; h min 60 min s 60 m 1000 km 1 s 58 . 9 m . 100    = 37.6 km/h yd ft 3 m yd 0936 . 1 s 58 . 9 m . 100   = 34.2 ft/s; h min 60 min s 60 ft 5280 mi 1 s ft 2 . 34    = 23.3 mi/h

  12. Page 12
    Read page 12 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 11 1.00 × 10 2 yd × m . 100 s 58 . 9 yd 0936 . 1 m 1  = 8.76 s 39. km mi 6214 . 0 h km 65  = 40.4 = 40. mi/h To the correct number of significant figures (2), 65 km/h does not violate a 40 mi/h speed limit. 40. 112 km × mi 65 h 1 km mi 6214 . 0  = 1.1 h = 1 h and 6 min 112 km × gal L 785 . 3 mi 28 gal 1 km mi 6214 . 0   = 9.4 L of gasoline 41. euro 32 . 1 $ lb 2046 . 2 kg 1 kg euros 45 . 2   = $1.47/lb One pound of peaches costs $1.47. 42. For the gasoline car: 500. mi gal 50 . 3 $ mi 0 . 28 gal 1   = $62.5 For the E85 car: 500. mi gal 85 . 2 $ mi 5 . 22 gal 1   = $63.3 The E85 vehicle would cost slightly more to drive 500. miles as compared to the gasoline vehicle ($63.3 versus $62.5). 43. Volume of lake = 100 mi 2 × 2 mi ft 5280       × 20 ft = 6 × 10 10 ft 3 6 × 10 10 ft 3 × mL μg 0.4 cm mL 1 in cm 2.54 ft in 12 3 3          = 7 × 10 14 μg mercury 7 × 10 14 μg g 10 1 kg 1 g μ 10 1 g 1 3 6      = 7 × 10 5 kg of mercury 44. Volume of room = 18 ft × 12 ft × 8 ft = 1700 ft 3 (carrying one extra significant figure) 1700 ft 3 3 3 3 3 m 48 cm 100 m 1 in cm 54 . 2 ft in 12                         48 m 3 CO g μ 10 1 CO g 1 m CO g μ 000 , 400 6 3    = 19 g = 20 g CO (to 1 sig. fig.)

  13. Page 13
    Read page 13 as text

    12 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY Temperature 45. a. T C = 9 5 (T F  32) = 9 5 (  459  F  32) =  273  C; T K = T C + 273 =  273  C + 273 = 0 K b. T C = 9 5 (  40.  F  32) =  40.  C; T K =  40.  C + 273 = 233 K c. T C = 9 5 (68  F  32) = 20.  C; T K = 20.  C + 273 = 293 K d. T C = 9 5 (7 × 10 7  F  32) = 4 × 10 7  C; T K = 4 × 10 7  C + 273 = 4 × 10 7 K 46. 96.1°F ±0.2°F; first, convert 96.1°F to °C. T C = 9 5 (T F  32) = 9 5 (96.1  32) = 35.6°C A change in temperature of 9°F is equal to a change in temperature of 5°C. So the uncertainty is: ±0.2°F × F 9 C 5   = ±0.1°C. Thus 96.1 ±0.2°F = 35.6 ±0.1°C. 47. a. T F = 5 9 × T C + 32 = 5 9 × 39.2°C + 32 = 102.6°F ( Note : 32 is exact.) T K = T C + 273.2 = 39.2 + 273.2 = 312.4 K b. T F = 5 9 × (  25) + 32 =  13°F; T K =  25 + 273 = 248 K c. T F = 5 9 × (  273) + 32 = -459°F; T K =  273 + 273 = 0 K d. T F = 5 9 × 801 + 32 = 1470°F; T K = 801 + 273 = 1074 K 48. a. T C = T K  273 = 233  273 =  40.°C T F = 5 9 × T C + 32 = 5 9 × (  40.) + 32 =  40.°F b. T C = 4  273 =  269°C; T F = 5 9 × (  269) + 32 =  452°F c. T C = 298  273 = 25°C; T F = 5 9 × 25 + 32 = 77°F d. T C = 3680  273 = 3410°C; T F = 5 9 × 3410 + 32 = 6170°F 49. T F = 5 9 × T C + 32; from the problem, we want the temperature where T F = 2T C . Substituting:

  14. Page 14
    Read page 14 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 13 2T C = 5 9 × T C + 32, (0.2)T C = 32, T C = 2 . 0 32 = 160  C T F = 2T C when the temperature in Fahrenheit is 2(160) = 320  F. Because all numbers when solving the equation are exact numbers, the calculated temperatures are also exact numbers. 50. T C = 9 5 (T F – 32) = 9 5 (72 – 32) = 22  C T C = T K – 273 = 313 – 273 = 40.  C The difference in temperature between Jupiter at 313 K and Earth at 72  F is 40.  C – 22  C = 18  C. 51. a. A change in temperature of 160°C equals a change in temperature of 100°A. So A 100 C 160   is our unit conversion for a degree change in temperature. At the freezing point: 0°A =  45°C Combining these two pieces of information: T A = (T C + 45°C) × C 160 A 100   = (T C + 45°C) × C 8 A 5   or T C = T A × A 5 C 8    45°C b. T C = (T F  32) × 9 5 ; T C = T A × 5 8  45 = (T F  32) × 9 5 T F  32 = 5 9          45 5 8 T A = 25 72 T A   81, T F = T A × A 25 F 72    49  F c. T C = T A × 5 8  45 and T C = T A ; so T C = T C × 5 8  45, 5 3T C = 45, T C = 75°C = 75°A d. T C = 86°A × A 5 C 8    45°C = 93°C; T F = 86°A × A 25 F 72    49°F = 199°F = 2.0 × 10 2 °F e. T A = (45°C + 45°C) × C 8 A 5   = 56°A 52. a. A change in temperature of 140  C is equal to 50  X. Therefore, X 50 C 140 o o is the unit con- version between a degree on the X scale to a degree on the Celsius scale. To account for the different zero points,  10  must be subtracted from the temperature on the X scale to get to the Celsius scale. The conversion between  X to  C is: T C = T X  X 50 C 140 o o  10  C, T C = T X  X 5 C 14 o o  10  C 100 o A 115 o C 160 o C -45 o C 100 o A 0 o A

  15. Page 15
    Read page 15 as text

    14 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY The conversion between  C to  X would be: T X = (T C + 10  C) C 14 X 5 o o b. Assuming 10  C and C 14 X 5 o o are exact numbers: T X = (22.0  C + 10  C) C 14 X 5 o o = 11.4  X c. Assuming exact numbers in the temperature conversion formulas: T C = 58.0  X  X 5 C 14 o o  10  C = 152  C T K = 152  C + 273 = 425 K T F = C 5 F 9 o o  152  C + 32  F = 306  F Density 53 . Mass = 350 lb lb g 6 . 453  = 1.6 × 10 5 g; V = 1.2 × 10 4 in 3 3 in cm 54 . 2        = 2.0 × 10 5 cm 3 Density = 3 3 5 5 g/cm 80 . 0 cm 10 0 . 2 g 10 1 volume mass     Because the material has a density less than water, it will float in water. 54. 3 3 3 3 cm 52 . 0 g 0 . 2 d ; cm 52 . 0 ) cm 50 . 0 ( 14 . 3 3 4 r 3 4 V        = 3.8 g/cm 3 The ball will sink. 55. 3 33 3 5 3 cm 10 4 . 1 m cm 100 km m 1000 km 10 0 . 7 14 . 3 3 4 r 3 4 V                 Density = 3 33 36 cm 10 4 . 1 kg g 1000 kg 10 2 volume mass     = 1.4 × 10 6 g/cm 3 = 1 × 10 6 g/cm 3 56. V = l × w × h = 2.9 cm × 3.5 cm × 10.0 cm = 1.0 × 10 2 cm 3 d = density = 3 3 2 cm g 2 . 6 cm 10 0 . 1 g 0 . 615  

  16. Page 16
    Read page 16 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 15 57. a. 5.0 carat g 51 . 3 cm 1 carat g 200 . 0 3   = 0.28 cm 3 b. 2.8 mL g 200 . 0 carat 1 cm g 51 . 3 mL cm 1 3 3    = 49 carats 58. For ethanol: 100. mL × mL g 789 . 0 = 78.9 g For benzene: 1.00 L mL g 880 . 0 L mL 1000   = 880. g Total mass = 78.9 g + 880. g = 959 g 59. V = 21.6 mL  12.7 mL = 8.9 mL; density = mL 9 . 8 g 42 . 33 = 3.8 g/mL = 3.8 g/cm 3 60. 5.25 g g 5 . 10 cm 1 3  = 0.500 cm 3 = 0.500 mL The volume in the cylinder will rise to 11.7 mL (11.2 mL + 0.500 mL = 11.7 mL). 61. a. Both have the same mass of 1.0 kg. b. 1.0 mL of mercury; mercury is more dense than water. Note : 1 mL = 1 cm 3 . 1.0 mL mL g 6 . 13  = 14 g of mercury; 1.0 mL mL g 998 . 0  = 1.0 g of water c. Same; both represent 19.3 g of substance. 19.3 mL mL g 9982 . 0  = 19.3 g of water; 1.00 mL mL g 32 . 19  = 19.3 g of gold d. 1.0 L of benzene (880 g versus 670 g) 75 mL mL g 96 . 8  = 670 g of copper; 1.0 L mL g 880 . 0 L mL 1000   = 880 g of benzene 62. a. 1.50 qt mL g 789 . 0 L mL 1000 qt 0567 . 1 L 1    = 1120 g ethanol b. 3.5 in 3 3 3 cm g 6 . 13 in cm 54 . 2         = 780 g mercury 63. a. 1.0 kg feather; feathers are less dense than lead. b. 100 g water; water is less dense than gold. c. Same; both volumes are 1.0 L. 64. a. H 2 (g): V = 25.0 g × g 000084 . 0 cm 1 3 = 3.0 × 10 5 cm 3 [H 2 (g) = hydrogen gas.] b. H 2 O(l): V = 25.0 g × g 9982 . 0 cm 1 3 = 25.0 cm 3 [H 2 O(l) = water.]

  17. Page 17
    Read page 17 as text

    16 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY c. Fe(s): V = 25.0 g × g 87 . 7 cm 1 3 = 3.18 cm 3 [Fe(s) = iron.] Notice the huge volume of the gaseous H 2 sample as compared to the liquid and solid samples. The same mass of gas occupies a volume that is over 10,000 times larger than the liquid sample. Gases are indeed mostly empty space. 65. V = 1.00 × 10 3 g × g 57 . 22 cm 1 3 = 44.3 cm 3 44.3 cm 3 = 1 × w × h = 4.00 cm × 4.00 cm × h, h = 2.77 cm 66. V = 22 g × g 96 . 8 cm 1 3 = 2.5 cm 3 ; V = π r 2 × l , where l = length of the wire 2.5 cm 3 = π × 2 2 mm 25 . 0       × 2 mm 10 cm 1         × l , l = 5.1 × 10 3 cm = 170 ft Classification and Separation of Matter 67. A gas has molecules that are very far apart from each other, whereas a solid or liquid has molecules that are very close together. An element has the same type of atom, whereas a compound contains two or more different elements. Picture i represents an element that exists as two atoms bonded together (like H 2 or O 2 or N 2 ). Picture iv represents a compound (like CO, NO, or HF). Pictures iii and iv contain representations of elements that exist as individual atoms (like Ar, Ne, or He). a. Picture iv represents a gaseous compound. Note that pictures ii and iii also contain a gaseous compound, but they also both have a gaseous element present. b. Picture vi represents a mixture of two gaseous elements. c. Picture v represents a solid element. d. Pictures ii and iii both represent a mixture of a gaseous element and a gaseous compound. 68. Solid: rigid; has a fixed volume and shape; slightly compressible Liquid: definite volume but no specific shape; assumes shape of the container; slightly compressible Gas: no fixed volume or shape; easily compressible Pure substance: has constant composition; can be composed of either compounds or ele- ments Element: substances that cannot be decomposed into simpler substances by chemical or physical means. Compound: a substance that can be broken down into simpler substances (elements) by chemical processes. Homogeneous mixture: a mixture of pure substances that has visibly indistinguishable parts. Heterogeneous mixture: a mixture of pure substances that has visibly distinguishable parts.

  18. Page 18
    Read page 18 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 17 Solution: a homogeneous mixture; can be a solid, liquid or gas Chemical change: a given substance becomes a new substance or substances with different properties and different composition. Physical change: changes the form (g, l, or s) of a substance but does no change the chemical composition of the substance. 69. Homogeneous: Having visibly indistinguishable parts (the same throughout). Heterogeneous: Having visibly distinguishable parts (not uniform throughout). a. heterogeneous (due to hinges, handles, locks, etc.) b. homogeneous (hopefully; if you live in a heavily polluted area, air may be heterogeneous.) c. homogeneous d. homogeneous (hopefully, if not polluted) e. heterogeneous f. heterogeneous 70. a. heterogeneous b. homogeneous c. heterogeneous d. homogeneous (assuming no imperfections in the glass) e. heterogeneous (has visibly distinguishable parts) 71. a. pure b. mixture c. mixture d. pure e. mixture (copper and zinc) f. pure g. mixture h. mixture i. mixture Iron and uranium are elements. Water (H 2 O) is a compound because it is made up of two or more different elements. Table salt is usually a homogeneous mixture composed mostly of sodium chloride (NaCl), but will usually contain other substances that help absorb water vapor (an anticaking agent). 72. Initially, a mixture is present. The magnesium and sulfur have only been placed together in the same container at this point, but no reaction has occurred. When heated, a reaction occurs. Assuming the magnesium and sulfur had been measured out in exactly the correct ratio for complete reaction, the remains after heating would be a pure compound composed of magnesium and sulfur. However, if there were an excess of either magnesium or sulfur, the remains after reaction would be a mixture of the compound produced and the excess reactant. 73. Chalk is a compound because it loses mass when heated and appears to change into another substance with different physical properties (the hard chalk turns into a crumbly substance). 74. Because vaporized water is still the same substance as solid water (H 2 O), no chemical reaction has occurred. Sublimation is a physical change. 75. A physical change is a change in the state of a substance (solid, liquid, and gas are the three states of matter); a physical change does not change the chemical composition of the substance. A chemical change is a change in which a given substance is converted into another substance having a different formula (composition).

  19. Page 19
    Read page 19 as text

    18 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY a. Vaporization refers to a liquid converting to a gas, so this is a physical change. The formula (composition) of the moth ball does not change. b. This is a chemical change since hydrofluoric acid (HF) is reacting with glass (SiO 2 ) to form new compounds that wash away. c. This is a physical change since all that is happening during the boiling process is the conversion of liquid alcohol to gaseous alcohol. The alcohol formula (C 2 H 5 OH) does not change. d. This is a chemical change since the acid is reacting with cotton to form new compounds. 76. a. Distillation separates components of a mixture, so the orange liquid is a mixture (has an average color of the yellow liquid and the red solid). Distillation utilizes boiling point differences to separate out the components of a mixture. Distillation is a physical change because the components of the mixture do not become different compounds or elements. b. Decomposition is a type of chemical reaction. The crystalline solid is a compound, and decomposition is a chemical change where new substances are formed. c. Tea is a mixture of tea compounds dissolved in water. The process of mixing sugar into tea is a physical change. Sugar doesn’t react with the tea compounds, it just makes the solution sweeter. Additional Exercises 77. Avo gadro’s number of dollars = 6.022 × 10 23 dollars/mol dollars people 10 7 dollars mol dollars 10 6.022 dollars mol 1 9 23    = 8.6 × 10 13 = 9 × 10 13 dollars/person 1 trillion = 1,000,000,000,000 = 1 × 10 12 ; each person would have 90 trillion dollars. 78. Density    3 cm 32 . 0 g 384 . 0 volume mass 1.2 g/cm 3 ; from the table, the other ingredient is caffeine. 79. Because each pill is 4.0% Lipitor by mass, for every 100.0 g of pills, there are 4.0 g of Lipitor present. Note that 100 pills is assumed to be an exact number. 100 pills g 1000 kg 1 pills g 0 . 100 Lipitor g 0 . 4 pill g 5 . 2    = 0.010 kg Lipitor 80. A chemical change involves the change of one or more substances into other substances through a reorganization of the atoms. A physical change involves the change in the form of a substance, but not its chemical composition. a. physical change (Just smaller pieces of the same substance.)

  20. Page 20
    Read page 20 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 19 b. chemical change (Chemical reactions occur.) c. chemical change (Bonds are broken.) d. chemical change (Bonds are broken.) e. physical change (Water is changed from a liquid to a gas.) f. physical change (Chemical composition does not change.) 81. Total volume =                m cm 100 m . 300 m cm 100 m . 200 × 4.0 cm = 2.4 × 10 9 cm 3 Volume of topsoil covered by 1 bag =                               in cm 54 . 2 in 0 . 1 in cm 54 . 2 ft in 12 ft . 10 2 2 2 = 2.4 × 10 4 cm 3 2.4 × 10 9 cm 3 3 4 cm 10 4 . 2 bag 1   = 1.0 × 10 5 bags topsoil 82. a. No; if the volumes were the same, then the gold idol would have a much greater mass because gold is much more dense than sand. b. Mass = 1.0 L g 1000 kg 1 cm g 32 . 9 1 L cm 000 1 3 3    = 19.32 kg (= 42.59 lb) It wouldn't be easy to play catch with the idol because it would have a mass of over 40 pounds. 83. 1 light year = 1 yr s mi 000 , 186 min s 60 h min 60 day h 24 yr day 365      = 5.87 × 10 12 miles 9.6 parsecs km m 1000 mi km 609 . 1 yr light mi 10 87 . 5 parsec yr light 26 . 3 12      = 3.0 × 10 17 m 84. mi ft 5280 h mi 65 min 60 h 1 s 60 min 1 s 1     = 95.3 ft = 100 ft If you take your eyes off the road for one second traveling at 65 mph, your car travels approximately 100 feet. 85. 18.5 cm × cm 25 . 5 F 0 . 10 o = 35.2  F increase; T final = 98.6 + 35.2 = 133.8  F T C = 5/9 (133.8 – 32) = 56.56  C

  21. Page 21
    Read page 21 as text

    20 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 86. Mass benzene = 58.80 g  25.00 g = 33.80 g; V benzene = 33.80 g g 880 . 0 cm 1 3  = 38.4 cm 3 V solid = 50.0 cm 3  38.4 cm 3 = 11.6 cm 3 ; density = 3 cm 6 . 11 g 00 . 25 = 2.16 g/cm 3 87. a. Volume × density = mass; the orange block is more dense. Because mass (orange) > mass (blue) and because volume (orange) < volume (blue), the density of the orange block must be greater to account for the larger mass of the orange block. b. Which block is more dense cannot be determined. Because mass (orange) > mass (blue) and because volume (orange) > volume (blue), the density of the orange block may or may not be larger than the blue block. If the blue block is more dense, its density cannot be so large that its mass is larger than the orange block’s mass. c. The blue block is more dense. Because mass (blue) = mass (orange) and because volume (blue) < volume (orange), the density of the blue block must be larger in order to equate the masses. d. The blue block is more dense. Because mass (blue) > mass (orange) and because the volumes are equal, the density of the blue block must be larger in order to give the blue block the larger mass. 88. Circumference = c = 2πr; V = 2 3 3 3 6 c 2 c 3 4 3 r 4               Largest density = 2 3 π 6 ) in 00 . 9 ( oz 25 . 5 = 3 in 3 . 12 oz 25 . 5 = 3 in oz 427 . 0 Smallest density = 2 3 π 6 ) in 25 . 9 ( oz 00 . 5 = 3 in 4 . 13 oz 00 . 5 = 3 in oz 73 . 0 Maximum range is: 3 in oz ) 427 . 0 373 . 0 (  or 0.40 ±0.03 oz/in 3 Uncertainty is in 2nd decimal place. 89. V = V final  V initial ; d = 3 3 3 cm 4 . 3 g 90 . 28 cm 4 . 6 cm 8 . 9 g 90 . 28   = 8.5 g/cm 3 d max = min max V mass ; we get V min from 9.7 cm 3  6.5 cm 3 = 3.2 cm 3 . d max = 3 3 cm g 0 . 9 cm 2 . 3 g 93 . 28  ; d min = max min V mass = 3 3 3 cm g 0 . 8 cm 3 . 6 cm 9 . 9 g 87 . 28   The density is 8.5 ±0.5 g/cm 3 .

  22. Page 22
    Read page 22 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 21 90 . We need to calculate the maximum and minimum values of the density, given the uncertainty in each measur ement. The maximum value is: d max = 3 3 cm 03 . 0 cm 00 . 25 g 002 . 0 g 625 . 19   = 3 cm 97 . 24 g 627 . 19 = 0.7860 g/cm 3 The minimum value of the density is: d min = 3 3 cm 03 . 0 cm 00 . 25 g 002 . 0 g 625 . 19   = 3 cm 03 . 25 g 623 . 19 = 0.7840 g/cm 3 The density of the liquid is between 0.7840 and 0.7860 g/cm 3 . These measurements are sufficiently precise to distinguish between ethanol (d = 0.789 g/cm 3 ) and isopropyl alcohol (d = 0.785 g/cm 3 ). 91. Let x = mass of copper and y = mass of silver. 105.0 g = x + y and 10.12 mL = 5 . 10 96 . 8 y x  ; solving:          5 . 10 0 . 105 96 . 8 12 . 10 x x × 8.96 × 10.5, 952.1 = (10.5) x + 940.8  (8.96) x (carrying 1 extra sig. fig.) 11.3 = (1.54) x , x = 7.3 g; mass % Cu = g 0 . 105 g 3 . 7 × 100 = 7.0% Cu 92. In general, glassware is estimated to one place past the markings. a. 128.7 mL glassware b. 18 mL glassware c. 23.45 mL glassware read to tenth’s place read to one’s place read to two decimal places Total volume = 128.7 + 18 + 23.45 = 170.15 = 170. (Due to 18, the sum would be known only to the ones place.) 130 129 128 127 30 20 10 23 24

  23. Page 23
    Read page 23 as text

    22 REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 93. Ball A: PE = mgz = 2.00 kg × 2 s m 81 . 9 × 10.0 m = 2 2 s m kg 196 = 196 J At point I: All this energy is transferred to ball B. All of B's energy is kinetic energy at this point. E total = KE = 196 J. At point II, the sum of the total energy will equal 196 J. At point II: PE = mgz = 4.00 kg × 2 s m 81 . 9 × 3.00 m = 118 J KE = E total  PE = 196 J − 118 J = 78 J 94. The bubbles of gas is air in the sand that is escaping; methanol and sand are not reacting. We will assume that the mass of trapped air is insignificant. Mass of dry sand = 37.3488 g  22.8317 g = 14.5171 g Mass of methanol = 45.2613 g  37.3488 g = 7.9125 g Volume of sand particles (air absent) = volume of sand and methanol  volume of methanol Volume of sand particles (air absent) = 17.6 mL  10.00 mL = 7.6 mL Density of dry sand (air present) = mL 0 . 10 g 5171 . 14 = 1.45 g/mL Density of methanol = mL 00 . 10 g 9125 . 7 = 0.7913 g/mL Density of sand particles (air absent) = mL 6 . 7 g 5171 . 14 = 1.9 g/mL ChemWork Problems 95. 4,145 mi × fathom 100 length cable 1 ft 6 fathom 1 mi ft 5280   = 3.648 × 10 4 cable lengths 4,145 mi × km m 1000 mi 0.62137 km 1  = 6.671 × 10 6 m 3.648 × 10 4 cable lengths × lengths cable 10 mile nautical 1 = 3,648 nautical miles 96. km 1 m 1000 mi 0.6214 km 1 s 119.2 mi 1.25   = 16.9 m/s 97. T C = 9 5 (T F  32) = 9 5 (134°F  32) = 56.7°C ; phosphorus would be a liquid.

  24. Page 24
    Read page 24 as text

    REVIEW MEASUREMENT AND CALCULATIONS IN CHEMISTRY 23 98. 3 24 3 12 3 cm 10 1.4 m cm 100 pm m 10 1 pm 69 14 . 3 3 4 r π 3 4 V                    Density = 3 24 23 cm 10 1.4 g 10 3.35 volume mass      = 24 g/cm 3 99. a. False; sugar is generally considered to be the pure compound sucrose, C 12 H 22 O 11 . b. False; elements and compounds are pure substances. c. True; air is a mixture of mostly nitrogen and oxygen gases. d. False; gasoline has many additives, so it is a mixture. e. True; compounds are broken down to elements by chemical change. 100. The rusting of iron is the only change listed where chemical formulas change, so it is the only chemical change. The others are physical properties. Note that the red glow of a platinum wire assumes no reaction between platinum and oxygen; the red glow is just hot Pt.

  25. Page 25
    Read page 25 as text

    24 CHAPTER 1 CHEMICAL FOUNDATIONS Questions 11. A law summarizes what happens, e.g., law of conservation of mass in a chemical reaction or the ideal gas law, PV = nRT. A theory (model) is an attempt to explain why something happens. D alton’s atomic theory explains why mass is conserved in a chemical reaction. The kinetic molecular theory explains why pressure and volume are inversely related at constant temperature and moles of gas present, as well as explaining the other mathematical relationships summarized in PV = nRT. 12. a. At 8 a.m., approximately 57 cars pass through the intersection per hour. b. At 12 a.m. (midnight), only 1 or 2 cars pass through the intersection per hour. c. Traffic at the intersection is limited to less than 10 cars per hour from 8 p.m. to 5 a.m. Starting at 6 a.m., there is a steady increase in traffic through the intersection, peaking at 8 a.m. when approximately 57 cars pass per hour. Past 8 a.m. traffic moderates to about 40 cars through the intersection per hour until noon, and then decreases to 21 cars per hour by 3 p.m. Past 3 p.m. traffic steadily increases to a peak of 52 cars per hour at 5 p.m., and then steadily decreases to the overnight level of less than 10 cars through the intersection per hour. d. The traffic pattern through the intersection is directly related to the work schedules of the general population as well as to the store hours of the businesses in downtown. e. Run the same experiment on a Sunday, when most of the general pop ulation doesn’t work and when a significant number of downtown stores are closed in the morning. 13. The fundamental steps are (1) making observations; (2) formulating hypotheses; (3) performing experiments to test the hypotheses. The key to the scientific method is performing experiments to test hypotheses. If after the test of time the hypotheses seem to account satisfactorily for some aspect of natural behavior, then the set of tested hypotheses turns into a theory (model). However, scientists continue to perform experiments to refine or replace existing theories. Hence, science is a dynamic or active process, not a static one. 14. A compound will always contain the same numbers (and types) of atoms. A given amount of hydrogen will react only with a specific amount of oxygen. Any excess oxygen will remain unreacted. 15. Law of conservation of mass: Mass is neither created nor destroyed. The total mass before a chemical reaction always equals the total mass after a chemical reaction.

  26. Page 26
    Read page 26 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 25 Law of definite proportion: A given compound always contains exactly the same proportion of elements by mass. For example, water is always 1 g H for every 8 g oxygen. Law of multiple proportions: When two elements form a series of compounds, the ratios of the mass of the second element that combine with 1 g of the first element always can be reduced to small whole numbers. For CO 2 and CO discussed in Section 1.4, the mass ratios of oxygen that react with 1 g carbon in each compound are in a 2 : 1 ratio. 16. Yes, 1.0 g H would react with 37.0 g 37 Cl, and 1.0 g H would react with 35.0 g 35 Cl. No, the mass ratio of H/Cl would always be 1 g H/37 g Cl for 37 Cl and 1 g H/35 g Cl for 35 Cl. As long as we had pure 37 Cl or pure 35 Cl, the ratios will always hold. If we have a mixture (such as the natural abundance of chlorine), the ratio will also be constant as long as the composition of the mixture of the two isotopes does not change. 17. Natural niacin and commercially produced niacin have the exact same formula of C 6 H 5 NO 2 . Therefore, both sources produce niacin having an identical nutritional value. There may be other compounds present in natural niacin that would increase the nutritional value, but the nutritional value due to just niacin is identical to the commercially produced niacin. 18. a. The smaller parts are electrons and the nucleus. The nucleus is broken down into protons and neutrons, which can be broken down into quarks. For our purpose, electrons, neutrons, and protons are the key smaller parts of an atom. b. All atoms of hydrogen have 1 proton in the nucleus. Different isotopes of hydrogen have 0, 1, or 2 neutrons in the nucleus. Because we are talking about atoms, this implies a neutral charge, which dictates 1 electron present for all hydrogen atoms. If charged ions were included, then different ions/atoms of H could have different numbers of electrons. c. Hydrogen atoms always have 1 proton in the nucleus, and helium atoms always have 2 protons in the nucleus. The number of neutrons can be the same for a hydrogen atom and a helium atom. Tritium ( 3 H) and 4 He both have 2 neutrons. Assuming neutral atoms, then the number of electrons will be 1 for hydrogen and 2 for helium. d. Water (H 2 O) is always 1 g hydrogen for every 8 g of O present, whereas H 2 O 2 is always 1 g hydrogen for every 16 g of O present. These are distinctly different compounds, each with its own unique relative number and types of atoms present. e. A chemical equation involves a reorganization of the atoms. Bonds are broken between atoms in the reactants, and new bonds are formed in the products. The number and types of atoms between reactants and products do not change. Because atoms are conserved in a chemical reaction, mass is also conserved. 19. J. J. Thomson’s study of cat hode-ray tubes led him to postulate the existence of negatively charged particles that we now call electrons. Ernest Rutherford and his alpha bombardment of metal foil experiments led him to postulate the nuclear atom  an atom with a tiny dense center of positive charge (the nucleus) with electrons moving about the nucleus at relatively large distances away; the distance is so large that an atom is mostly empty space.

  27. Page 27
    Read page 27 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 26 20. The atom is composed of a tiny dense nucleus containing most of the mass of the atom. The nucleus itself is composed of neutrons and protons. Neutrons have a mass slightly larger than that of a proton and have no charge. Protons, on the other hand, have a 1+ relative charge as compared to the 1  charged electrons; the electrons move about the nucleus at relatively large distances. The volume of space that the electrons move about is so large, as compared to the nucleus, that we say an atom is mostly empty space. 21. The number and arrangement of electrons in an atom determine how the atom will react with other atoms. The electrons determine the chemical properties of an atom. The number of neutrons present determines the isotope identity. 22. Density = mass/volume; if the volumes are assumed equal, then the much more massive proton would have a much larger density than the relatively light electron. 23. For lighter, stable isotopes, the number of protons in the nucleus is about equal to the number of neutrons. When the number of protons and neutrons is equal to each other, the mass number (protons + neutrons) will be twice the atomic number (protons). Therefore, for lighter isotopes, the ratio of the mass number to the atomic number is close to 2. For example, consider 28 Si, which has 14 protons and (28 – 14 =) 14 neutrons. Here, the mass number to atomic number ratio is 28/14 = 2.0. For heavier isotopes, there are more neutrons than protons in the nucleus. Therefore, the ratio of the mass number to the atomic number increases steadily upward from 2 as the isotopes get heavier and heavier. For example, 238 U has 92 protons and (238 – 92 =) 146 neutrons. The ratio of the mass number to the atomic number for 238 U is 238/92 = 2.6. 24. Some elements exist as molecular substances. That is, hydrogen normally exists as H 2 molecules, not single hydrogen atoms. The same is true for N 2 , O 2 , F 2 , Cl 2 , Br 2 , and I 2 . Exercises Development of the Atomic Theory 25. a. The composition of a substance depends on the numbers of atoms of each element making up the compound (depends on the formula of the compound) and not on the composition of the mixture from which it was formed. b. Avogadro’s hypothesis (law) implies that volume ratios are equal to molecule ratios at constant temperature and pressure. H 2 (g) + Cl 2 (g) → 2 HCl(g). From the balanced equation, the volume of HCl produced will be twice the volume of H 2 (or Cl 2 ) reacted. 26. Avogadro’s hypothesis (law) implies that volume rat ios are equal to molecule ratios at constant temperature and pressure. Here, 1 volume of N 2 reacts with 3 volumes of H 2 to produce 2 volumes of the gaseous product or in terms of molecule ratios: 1 N 2 + 3 H 2  2 product In order for the equation to be balanced, the product must be NH 3 .

  28. Page 28
    Read page 28 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 27 27. From the law of definite proportions, a given compound always contains exactly the same proportion of elements by mass. The first sample of chloroform has a total mass of 12.0 g C + 106.4 g Cl + 1.01 g H = 119.41 g (carrying extra significant figures). The mass percent of carbon in this sample of chloroform is: total g 41 . 119 C g 0 . 12 × 100 = 10.05% C by mass From the law of definite proportions, the second sample of chloroform must also contain 10.05% C by mass. Let x = mass of chloroform in the second sample: x C g 0 . 30 × 100 = 10.05, x = 299 g chloroform 28. A compound will always have a constant composition by mass. From the initial data given, the mass ratio of H : S : O in sulfuric acid (H 2 SO 4 ) is: 02 . 2 00 . 64 : 02 . 2 07 . 32 : 02 . 2 02 . 2 = 1 : 15.9 : 31.7 If we have 7.27 g H, then we will have 7.27 × 15.9 = 116 g S and 7.27 × 31.7 = 230. g O in the second sample of H 2 SO 4 . 29. Hydrazine: 1.44 × 1 10  g H/g N; ammonia: 2.16 × 1 10  g H/g N; hydrogen azide: 2.40 × 2 10  g H/g N. Let's try all of the ratios: 0240 . 0 144 . 0 = 6.00; 0240 . 0 216 . 0 = 9.00; 0240 . 0 0240 . 0 = 1.00; 144 . 0 216 . 0 = 1.50 = 2 3 All the masses of hydrogen in these three compounds can be expressed as simple whole- number ratios. The g H/g N in hydrazine, ammonia, and hydrogen azide are in the ratios 6 : 9 : 1. 30. The law of multiple proportions does not involve looking at the ratio of the mass of one element with the total mass of the compounds. To illustrate the law of multiple proportions, we compare the mass of carbon that combines with 1.0 g of oxygen in each compound: compound 1: 27.2 g C and 72.8 g O (100.0  27.2 = mass O) compound 2: 42.9 g C and 57.1 g O (100.0  42.9 = mass O) The mass of carbon that combines with 1.0 g of oxygen is: compound 1: O g 8 . 72 C g 2 . 27 = 0.374 g C/g O compound 2: O g 1 . 57 C g 9 . 42 = 0.751 g C/g O 1 2 374 . 0 751 . 0  ; this supports the law of multiple proportions because this carbon ratio is a whole number.

  29. Page 29
    Read page 29 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 28 31. For CO and CO 2 , it is easiest to concentrate on the mass of oxygen that combines with 1 g of carbon. From the formulas (two oxygen atoms per carbon atom in CO 2 versus one oxygen atom per carbon atom in CO), CO 2 will have twice the mass of oxygen that combines per gram of carbon as compared to CO. For CO 2 and C 3 O 2 , it is easiest to concentrate on the mass of carbon that combines with 1 g of oxygen. From the formulas (three carbon atoms per two oxygen atoms in C 3 O 2 versus one carbon atom per two oxygen atoms in CO 2 ), C 3 O 2 will have three times the mass of carbon that combines per gram of oxygen as compared to CO 2 . As expected, the mass ratios are whole numbers as predicted by the law of multiple proportions. 32. Compound I: Q g 00 . 1 R g 67 . 4 Q g 00 . 3 R g 0 . 14  ; compound II: Q g 00 . 1 R g 56 . 1 Q g 50 . 4 R g 00 . 7  The ratio of the masses of R that combine with 1.00 g Q is: 56 . 1 67 . 4 = 2.99 ≈ 3 As expected from the law of multiple proportions, this ratio is a small whole number. Because compound I contains three times the mass of R per gram of Q as compared with compound II (RQ), the formula of compound I should be R 3 Q. 33. Mass is conserved in a chemical reaction because atoms are conserved. Chemical reactions involve the reorganization of atoms, so formulas change in a chemical reaction, but the number and types of atoms do not change. Because the atoms do not change in a chemical reaction, mass must not change. In this equation we have two oxygen atoms and four hydrogen atoms both before and after the reaction occurs. 34. Mass is conserved in a chemical reaction. ethanol + oxygen  water + carbon dioxide Mass: 46.0 g 96.0 g 54.0 g ? Mass of reactants = 46.0 + 96.0 = 142.0 g = mass of products 142.0 g = 54.0 g + mass of CO 2 , mass of CO 2 = 142.0 – 54.0 = 88.0 g 35. To get the atomic mass of H to be 1.00, we divide the mass of hydrogen that reacts with 1.00 g of oxygen by 0.126; that is, 126 . 0 126 . 0 = 1.00. To get Na, Mg, and O on the same scale, we do the same division. Na: 126 . 0 875 . 2 = 22.8; Mg: 126 . 0 500 . 1 = 11.9; O: 126 . 0 00 . 1 = 7.94 H O Na Mg Relative value 1.00 7.94 22.8 11.9 Accepted value 1.008 16.00 22.99 24.31 For your information, the atomic masses of O and Mg are incorrect. The atomic masses of H and Na are close to the values given in the periodic table. Something must be wrong about the assumed formulas of the compounds. It turns out the correct formulas are H 2 O, Na 2 O, and MgO. The smaller discrepancies result from the error in the assumed atomic mass of H.

  30. Page 30
    Read page 30 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 29 36. If the formula is InO, then one atomic mass of In would combine with one atomic mass of O, or: O g 000 . 1 In g 784 . 4 00 . 16 A  , A = atomic mass of In = 76.54 If the formula is In 2 O 3 , then two times the atomic mass of In will combine with three times the atomic mass of O, or: O g 000 . 1 In g 784 . 4 00 . 16 ) 3 ( A 2  , A = atomic mass of In = 114.8 The latter number is the atomic mass of In used in the modern periodic table. The Nature of the Atom 37. From section 1- 7, the nucleus has “a diameter of about 10  13 cm” and the electrons “move about the nucleus at an average distance of about 10  8 cm fro m it.” We will use these statements to help determine the densities. Density of hydrogen nucleus (contains one proton only): V nucleus = 3 40 3 14 3 cm 10 5 ) cm 10 5 ( ) 14 . 3 ( 3 4 r 3 4        d = density = 3 15 3 40 24 g/cm 10 3 cm 10 5 g 10 67 . 1       Density of H atom (contains one proton and one electron): V atom = 3 24 3 8 cm 10 4 ) cm 10 1 ( ) 14 . 3 ( 3 4      d = 3 3 24 28 24 g/cm 0.4 cm 10 4 g 10 9 g 10 67 . 1         38. Because electrons move about the nucleus at an average distance of about 1 × 8 10  cm, the diameter of an atom will be about 2 × 8 10  cm. Let's set up a ratio: cm 10 2 cm 10 1 model of diameter mm 1 atom of diameter nucleus of diameter 8 13       ; solving: diameter of model = 2 × 10 5 mm = 200 m 39. C 10 1.602 charge electron 1 C 10 93 . 5 19 18      = 37 negative (electron) charges on the oil drop 40. First, divide all charges by the smallest quantity, 6.40 × 13 10  : 13 12 10 40 . 6 10 56 . 2     = 4.00; 640 . 0 68 . 7 = 12.0; 640 . 0 84 . 3 = 6.00

  31. Page 31
    Read page 31 as text

    CHAPTER 1 CHEMICAL FOUNDATIONS 30 Because all charges are whole-number multiples of 6.40 × 13 10  zirkombs, the charge on one electron could be 6.40 × 13 10  zirkombs. However, 6.40 × 13 10  zirkombs could be the charge of two electrons (or three electrons, etc.). All one can conclude is that the charge of an electron is 6.40 × 13 10  zirkombs or an integer fraction of 6.40 × 13 10  zirkombs. 41. Z is the atomic number and is equal to the number of protons in the nucleus. A is the mass number and is equal to the number of protons plus neutrons in the nucleus. X is the symbol of the element. See the front cover of the text which has a listing of the symbols for the various elements and corresponding atomic number or see the periodic table on the cover to determine the identity of the various atoms. Because all of the atoms have equal numbers of protons and electrons, each atom is neutral in charge. a. Na 23 11 b. F 19 9 c. O 16 8 42. The atomic number for carbon is 6. 14 C has 6 protons, 14  6 = 8 neutrons, and 6 electrons in the neutral atom. 12 C has 6 protons, 12 – 6 = 6 neutrons, and 6 electrons in the neutral atom. The only difference between an atom of 14 C and an atom of 12 C is that 14 C has two additional neutrons. 43. a. 79 35 Br: 35 protons, 79  35 = 44 neutrons. Because the charge of the atom is neutral, the number of protons = the number of electrons = 35. b. 81 35 Br: 35 protons, 46 neutrons, 35 electrons c. 239 94 Pu: 94 protons, 145 neutrons, 94 electrons d. 133 55 Cs: 55 protons, 78 neutrons, 55 electrons e. 3 1 H: 1 proton, 2 neutrons, 1 electron f. 56 26 Fe: 26 protons, 30 neutrons, 26 electrons 44. a. 235 92 U: 92 p, 143 n, 92 e b. 27 13 Al: 13 p, 14 n, 13 e c. 57 26 Fe: 26 p, 31 n, 26 e d. 208 82 Pb: 82 p, 126 n, 82 e e. 86 37 Rb: 37 p, 49 n, 37 e f. 41 20 Ca: 20 p, 21 n, 20 e 45. a. Element 8 is oxygen. A = mass number = 9 + 8 = 17; 17 8 O b. Chlorine is element 17. 37 17 Cl c. Cobalt is element 27. 60 27 Co d. Z = 26; A = 26 + 31 = 57; 57 26 Fe e. Iodine is element 53. 131 53 I f. Lithium is element 3. 7 3 Li

873 more pages in the full document

Unlock it once and it stays in your library, ready to chat with or turn into flashcards.

Unlock the full document
See all

Study this document with CramX

Once it is in your library, every tool can work from it.