CramX Logo
Back to FlashcardsInformation Technology / CompTIA Network+ N10-008 ITProTV - NET+ 008 Practice Exam: Baseline #1

CompTIA Network+ N10-008 ITProTV - NET+ 008 Practice Exam: Baseline #1

Information Technology110 CardsCreated 8 months ago

This flashcard set from the CompTIA Network+ N10-008 ITProTV Practice Exam reviews WAN technologies and their bandwidth capacities. It highlights that OC-3 provides the highest potential bandwidth among the listed options, reaching 155.52 Mbps.

Report

** Which WAN technology offers the highest potential bandwidth?

Frame Relay

T3

E3

FDDI

OC-3

OC-3

Explanation:

SONET WAN Technologies

- Frame Relay up to 1.544 Mbps

- OC-1 speeds up to 51.84 Mbps

- OC-3 speeds up to 155.52 Mbps

- OC-12 speeds up to 622.08 Mbps

- ATM speeds up to 622 Mbps

Rate to track your progress ✦

Tap or swipe ↕ to flip
Swipe ←→Navigate
1/110

Key Terms

Term
Definition

** Which WAN technology offers the highest potential bandwidth?

Frame Relay

T3

E3

FDDI

OC-3

OC-3

Explanation:

SONET WAN Technologies

** While troubleshooting a network outage on a 10GBase-SW network, a technician finds a 500-meter fiber cable with a small service loop and suspects it might be the cause of the outage. Which of the following is MOST likely the issue?

bend radius exceeded
maximum cable length exceeded
dirty connectors
RF interference caused by impedance mismatch

maximum cable length exceeded

Explanation:
10GBase-SW max cable length is 300 meters...

** Your network uses a single switch that divides your network into 3 virtual LANs (VLANs). The devices in each VLAN are connected to a single port on the switch. You plan to implement a second switch on your Network. You need to ensure that the VLANs that were originally implemented are spread across both switches. What should you do?

create a subnet-based VLAN on both switches.
implement frame tagging on both switches.
create a protocol-based VLAN on both switches.
Create a port-based VLAN on both switches.

implement frame tagging on both switches

Explanation:
Frame Tagging is a technique t...

Which one of these requires a user complete an action, such as digitally signing an AUP, prior to accessing the Network?

Captive Portal
Access Control List
MAC Filter
Port Security

Captive Portal

Explanation:
Captive Portals - are Web Pages, typically used in publi...

Your company has decided to implement an Acceptable Use Policy (AUP) that must be distributed to all users. You have been asked to write the preliminary policy to submit your management approval. What is defined in this policy?

which method administrators should use to back up Network data
how users are allowed to employ company hardware
the sensitivity of company data
which users require access to certain company data

how users are allowed to employ company hardware

Your company has a corporate-wide Windows Server network using the TCP/IP protocol. Several users are complaining that their computers are getting IP address conflics. Which action should you perform?

Implement a DHCP Server
Increase the TCP window size
Change the MAC Address for each Network interface card
Manually configure IP Addresses on each computer

Implement a DHCP server