Mechanical Engineering Flashcards & Study Decks (Quick Revision) | CramX

Plumbing - Building Water Supply Part 13

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Flashcards

Plumbing - Building Water Supply Part 12

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 11

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 10

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 9

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 8

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 7

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 6

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 5

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 4

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 3

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 2

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels. NYC Water Tunnel #1 took 6 years to complete, enhancing the city’s water infrastructure.

Plumbing - Building Water Supply Part 1

NYC Water Tunnel #3 construction began in 1970, aiming to improve water distribution and provide backup to existing tunnels.

Plumbing - Vocabulary

This deck covers essential vocabulary related to plumbing, focusing on key terms and their definitions.

Plumbing - Session 13 Part 2

Material cost after sequential discounts is $850.00. Labor for 60 hours at $7.24/hour with a 25% markup totals $543.00. Subcontractor cost adds 10%, bringing it to $597.30 (note: original $1,532.85 appears incorrect). General contractor's 15% profit is $229.93.

Plumbing - Session 13 Part 1

Material cost after sequential discounts is $850.00. Labor for 60 hours at $7.24/hour with a 25% markup totals $543.00. Subcontractor cost adds 10%, bringing it to $597.30 (note: original $1,532.85 appears incorrect). General contractor's 15% profit is $229.93.

Plumbing - Session 12 Part 2

A pneumatic sewage ejector system must include a Fresh Air Inlet (F.A.I.) located on the inlet side upstream of the ejector pot. This ensures proper venting and prevents the buildup of sewer gases in the system, maintaining safety and code compliance.

Plumbing - Session 12 Part 1

A pneumatic sewage ejector system must include a Fresh Air Inlet (F.A.I.) located on the inlet side upstream of the ejector pot. This ensures proper venting and prevents the buildup of sewer gases in the system, maintaining safety and code compliance.

Plumbing - Session 11 Part 3

Connections between existing lead service pipes and copper or brass pipes must be made using a compression coupling to provide a secure, code-compliant, and lead-safe transition.

Plumbing - Session 11 Part 2

Goosenecks are not required for ductile iron connections, as these rigid pipes are strong and do not require the flexibility that goosenecks provide in other materials.

Plumbing - Session 11 Part 1

Only a licensed master plumber is authorized to set approved water meters in New York City, ensuring compliance with local plumbing codes and standards.

Plumbing - Session 10 Part 2

All plumbing inspections must be carried out at the sole cost and expense of the permit holder, who is legally responsible for ensuring the work complies with code requirements. This person is typically the one who applied for and was granted the plumbing permit.

Plumbing - Session 10 Part 1

All plumbing inspections must be carried out at the sole cost and expense of the permit holder, who is legally responsible for ensuring the work complies with code requirements. This person is typically the one who applied for and was granted the plumbing permit.

Plumbing - Session 9 Part 2

The maximum distance between cleanouts on horizontal drainage lines is 100 feet, as per most plumbing codes like the IPC (International Plumbing Code). Cleanouts provide access for clearing blockages and must be spaced appropriately to ensure maintenance can be performed effectively.

Plumbing - Session 9 Part 1

The maximum distance between cleanouts on horizontal drainage lines is 100 feet, as per most plumbing codes like the IPC (International Plumbing Code). Cleanouts provide access for clearing blockages and must be spaced appropriately to ensure maintenance can be performed effectively.

Plumbing - Session 8 Part 2

A trap borer is a tool used by plumbers to ream or bore out lead pipe, creating a smooth, uniform opening. This preparation is essential when installing a solder nipple, ensuring a proper fit and seal.

Plumbing - Session 8 Part 1

A trap borer is a tool used by plumbers to ream or bore out lead pipe, creating a smooth, uniform opening. This preparation is essential when installing a solder nipple, ensuring a proper fit and seal.

Plumbing - Session 7 Part 3

This flashcard deck covers key concepts and regulations from a plumbing session, focusing on true/false statements and multiple-choice questions related to plumbing codes and practices.

Plumbing - Session 7 Part 2

This flashcard deck covers key concepts and regulations from a plumbing session, focusing on true/false statements and multiple-choice questions related to plumbing codes and practices.

Plumbing - Session 7 Part 1

This flashcard deck covers key concepts and regulations from a plumbing session, focusing on true/false statements and multiple-choice questions related to plumbing codes and practices.

Plumbing - Test 1979 Part 2

Indirect waste refers to a piping arrangement where wastewater from a fixture (like a sink) discharges indirectly into the drainage system. This setup prevents backflow and cross-contamination, making it essential in food-related areas to protect against food contamination.

Plumbing - Test 1979 Part 1

Indirect waste refers to a piping arrangement where wastewater from a fixture (like a sink) discharges indirectly into the drainage system. This setup prevents backflow and cross-contamination, making it essential in food-related areas to protect against food contamination.

Plumbing - Session 5 Part 3

An air break is a drainage method where a fixture's drain discharges indirectly into another drainage system below the flood level rim but above the trap seal. This setup helps prevent contamination by avoiding direct physical connection with the sanitary system.

Plumbing - Session 5 Part 2

An air break is a drainage method where a fixture's drain discharges indirectly into another drainage system below the flood level rim but above the trap seal. This setup helps prevent contamination by avoiding direct physical connection with the sanitary system.

Plumbing - Session 5 Part 1

An air break is a drainage method where a fixture's drain discharges indirectly into another drainage system below the flood level rim but above the trap seal. This setup helps prevent contamination by avoiding direct physical connection with the sanitary system.

Plumbing - Session 4 Part 2

Caulking ferrules are used to connect lead pipes to cast iron pipes, providing a secure and leak-proof joint. They allow the lead pipe to be caulked or soldered into the ferrule, which is then joined to the cast iron pipe.

Plumbing - Session 4 Part 1

Caulking ferrules are used to connect lead pipes to cast iron pipes, providing a secure and leak-proof joint. They allow the lead pipe to be caulked or soldered into the ferrule, which is then joined to the cast iron pipe.

Plumbing - Session 3 Part 2

A leader is a drainage pipe that carries storm water from a roof or gutter to an approved disposal point, such as a storm sewer or ground outlet. It is typically installed vertically along the exterior of a building.

Plumbing - Session 3 Part 1

The total thickness of the joint is 2-3/4 inches, accounting for the 1-1/2 inch lead pipe, two layers of 1/8 inch overlaps, and two 3/8 inch wiping beads. These added thicknesses increase the joint size at its widest point.

Plumbing - General Plumbing By E. Troise

Backflow is the unwanted reverse flow of water or other substances into a potable (drinkable) water supply. It occurs when pressure changes cause contaminated water to flow backward from a non-potable source into clean water lines, posing health risks.

Mechanical Engineering Flashcards and Study Decks

Resource Type

Company

Explore

Study Tools