OSHA Module 6: Stairways and Ladders

This deck covers key safety standards and requirements for stairways and ladders as outlined in OSHA Module 6, including spacing, materials, and load ratings.

Ladder rungs should be spaced between _____ and _______ inches apart.

10....14
Tap or swipe ↕ to flip
Swipe ←→Navigate
1/8

Key Terms

Term
Definition
Ladder rungs should be spaced between _____ and _______ inches apart.
10....14
Employers must provide a stairway or ladder if the elevation between two surfaces on a site is ____ inches or more.
19
Which of the following ladder materials should be avoided when working near power lines?
Aluminum
Stairs should be installed between _____ and _______ degrees from horizontal.
30....50
Handrails should come up no more than _____ inches and no less than ___ inches from the tread of the stairway.
37...30
The maximum intended load rating for portable ladders should be at least ____.
200lbs

Related Flashcard Decks

Study Tips

  • Press F to enter focus mode for distraction-free studying
  • Review cards regularly to improve retention
  • Try to recall the answer before flipping the card
  • Share this deck with friends to study together
TermDefinition
Ladder rungs should be spaced between _____ and _______ inches apart.
10....14
Employers must provide a stairway or ladder if the elevation between two surfaces on a site is ____ inches or more.
19
Which of the following ladder materials should be avoided when working near power lines?
Aluminum
Stairs should be installed between _____ and _______ degrees from horizontal.
30....50
Handrails should come up no more than _____ inches and no less than ___ inches from the tread of the stairway.
37...30
The maximum intended load rating for portable ladders should be at least ____.
200lbs
____ refers to the point at which the structural members of a ladder lose their ability to carry a load.
Load refusal
Handrails must be provided to all stairways that have ____ or more risers, or are higher than 30 inches.
Four